Set of big end bearing shells, 0.25mm, DS/ID >66, HY

Set of big end bearing shells, Standard size, DS/ID >66, HY

Timing Chain, D models >1966, Traction Avant, HY etc.

Set of big end bearing shells, 0.50mm, DS/ID >66, HY

Set of big end bearing shells, 0.75mm, DS/ID >66, HY

Set of big end bearing shells, 1.0 mm, DS/ID >66, HY

Set of main bearing shells, 0.5mm, DS/ID >66, HY

Set of main bearing shells, 0.25mm, DS/ID >66, HY

Set of main bearing shells, 0.75mm, DS/ID >66, HY

Set of main bearing shells, 1.0mm, DS/ID >66, HY

Set of main bearing shells, STD, DS/ID >66, HY

Ball bearing for front of camshaft, behind pulley.

Bearing: Water pump and / or flywheel

Bypass hose 1961 > 1965

Crankshaft oil seal, HY, DS, ID

Cylinder head gasket, 1911cc models, pre 1966

Cylinder liner base gasket 0.07mm

Drain plug copper washer, 16mm

Engine Assembly / Camshaft Lube

Exhaust Manifold 9/62 → 1966

Exhaust manifold gasket, DS/ID >1966, HY etc. 1963>

Exhaust Valve

Fuel pump gasket

Gasket for closing plate at rear of head

Gasket for closing plate on cylinder head

Gasket for spark plug tube

Gasket set for 1911cc engine 55 > 66

HT lead set (modern type)

Inlet manifold gasket

Inlet manifold gasket, ID19 until April 1963

Inlet Valve

M7 Stud, 43mm long

Oil filler cap, May 1962 onwards (H Van 1963>)

Oil pump gasket

Oil pump pick up gasket

Oil pump spring

Piston and liner set, 78mm dome top

Piston and liner set, 78mm flat top

Piston ring set, 78mm bore (1911cc)

Rocker cover gasket, D models >65, H Van 1963>

Rubber seal for Oil filler cap, May 1962 onwards (H Van 1963>)

Small end bush for con-rod

Sump end gaskets (set of 2)

Sump gasket retaining strip

Sump Gasket set

Sump gasket set 2/59>

Timing cover gasket

Valve guide

Valve stem seal 456998

Water pump gasket >66